EN
Switch on the appliance using the on/off
switch (1).
Let the appliance run until the remaining
descaling agent is in the coffee pot (16).
The decalcification indicator (D) disappears
from the display (8).
Rinse the appliance with clean water:
Fill the water reservoir (14) with clean -
water up to the maximum mark on the
water level indicator (15).
Place the empty coffee pot (16) on the -
heating plate (18).
Simultaneously press the coffee quantity -
selector (3) and the coffee strength
selector (4). The decalcification indicator
(D) is shown on the display (8).
Switch on the appliance using the on/off -
switch (1).
Let all water run out of the appliance.-
Remove the mains plug from the wall
socket.
Allow the appliance to cool down completely.
Clean the appliance. Refer to the section
”Cleaning and maintenance”.
Disclaimer
Subject to change; specifications can be
changed without further notice.
Close the cover (24).
Tighten the screw (23) using the screwdriver
(20).
Descaling the appliance (fig. A - D)
The appliance must be descaled when the
decalcification indicator (D) is shown on the
display (8). If the appliance must be descaled,
use a suitable descaling agent. Special
descaling agents are available from our
service station.
Note: If you want to descale the appliance at
any time, simultaneously press the coffee
quantity selector (3) and the coffee strength
selector (4) to show the decalcification
indicator (D) on the display (8).
Note: Princess will not be responsible for any
damage caused by descaling agents. Damage
caused by not regularly descaling the appliance
is not covered by the guarantee.
Warning!
Before descaling the appliance, remove -
the mains plug from the wall socket and
wait until the appliance has cooled down.
Do not immerse the appliance in water or -
any other liquids for cleaning.
Caution!
Be careful when descaling the appliance to -
prevent damage to furniture or clothing.
Do not use vinegar or vinegar concentrate -
to descale the appliance.
Do not use citric acid to descale the -
appliance.
Fill the water reservoir (7) with a suitable
descaling agent.
Place the coffee pot (16) on the heating
plate (18).
Insert the mains plug into the wall socket.
Switch on the appliance using the on/off
switch (1).
Let the appliance run until 1/3 of the
descaling agent is in the coffee pot (16).
Switch off the appliance using the on/off
switch (1).
Let the descaling agent work for
approximately 30 minutes.
Komentáře k této Příručce